Home » Patio Cover » Challenge Your Creativity With Making Canvas Patio Covers

Challenge Your Creativity with Making Canvas Patio Covers

Patio covers are essential thing to equip in your outdoor are and the canvas patio covers are one of materials to recommend. The canvas cover offer good coverage since the shade sail is flexible and it can be made personally at home.

The DIY Project
To make canvas patio covers diy, first thing you must do is determining the anchor points. For example, the trianglel shaped shade is supposed to be flown from three anchor points of the opposite direction; meanwhile the square one needs four points. After that, you can continue to install the anchor. You must drill all and then instant the eyebolt from the stud. The, you can drill the pilot holes to the material and in this step; you can involve the anchor mollies made of brick, stone, or concrete. To the mollies, you should apply the adhesive. Ten, you can twist around 3/8 inches and 4 eye screw to be applied to the mollies well. The next step of making canvas patio covers is to prepare canvas cover. You can purchase heavy duck material from online store. After that, you need to measure the anchors’ inside are in 6 inches. Then, cut the canvas, fold the edges in 1 inch and sew them all to make the pocket.

Finished with the step, you should measure the distance of two anchors to insert the aircraft cable. After that, make a small loop at the cable’s end part and you must then press the 3 long tails against the long cable. Then, you can thread the right size of the canvas into the cable. The last step to make canvas patio covers is to thread the free end cable from turnbuckle in which the result can be installed the hook to the opposite of the anchor for the finishing.

Waterproof Canvas Patio Covers
Waterproof Canvas Patio Covers
Canvas Patio Covers Denver
Canvas Patio Covers Denver
Canvas Patio Covers Triangle
Canvas Patio Covers Triangle

Related Post