Cushions are best friend of patio chairs but the rains do not understand of their feeling to be separated and to see the cushion wet is not the rain’s responsibility: therefore, there must be patio cushion storage to equip in your outdoor area to house the cushions quickly when the rains falling.
This DIY is Worth to Try
It could be more a breeze to adopt patio cushion storage from the store but to make it with your own hand is a great and priceless reward. First, you need to cut plywood with certain sizes: such as 19.5 for base, 18 for front and back part, 18 per each side and 21 and 48 for lid. This measurement is for 4x8 sheets of plywood. After this, you need to assemble. To make it weather resistant, use 3M Marine Adhesive Sealant to be applied to the base panel of elevated surface. Apply a little bit as well to the long sides edges. After that, stand the back panel among the edge that has been applied with adhesive. Secure every single inches using nails while someone hold it firmly. The finishing nails can be used with nail guns.
Once you do this DIY patio cushion storage ideas step, do not forget to apply ear protection for the sounds of nail guns might harm your hearing. After every side has been nailed, you should apply the sealant to both the base and side edges. Nail them at the end of front panel. After this, you move to paint them. Place the box on drop cloth and apply every surface with 2 box coats as well as the underside. The exterior, however, need at least 2 good latex paint coats. Then, equip the bottom of the box with 4 casters to make it easily moved and this patio cushion storage is finished and ready to house the cushions.